NIST Predictive Model Development Project

(Top) Smokeview rendering of a fire in a cable spreading room of a nuclear power plant. (Bottom) Cable burning experiment conducted in the NIST Large Fire Laboratory and sponsored by the U.S. Nuclear Regulatory Commission.

Predictive Model Development Project

 

 Summary:

Practicing engineers need tools to predict the fire performance of engineered buildings, their fire safety systems, and the hazards to occupants and emergency responders during a fire. This project is developing and maintaining the numerical fire models called CFAST (Consolidated Fire and Smoke Transport) and FDS (Fire Dynamics Simulator), as well as Smokeview, the visualization program used by both.

Description:

What is the problem? Fire protection engineers, regulatory authorities, fire service personnel, and fire researchers all rely on fire models for design and analysis of fire safety features in a building and for post-fire reconstruction and forensic applications. Performance-based design of buildings requires validated fire modeling tools to justify equivalent safety when compared to prescriptive code requirements. For example, performance-based standards like NFPA 805 (Fire Protection for Light-Water Reactor Electric Generating Plants) require that fire models be verified and validated according to guidelines set forth in standard guides like ASTM E 1355, Evaluating the Predictive Capability of Deterministic Fire Models.

Why is it hard to solve? The challenge is three-fold. First, we must develop state of the art physics-based sub-models to describe turbulent fluid flow, combustion, radiative heat transfer, and other fire-related phenomena for length-scales that vary many orders of magnitude (from cm to 102 km) . Second, we have to demonstrate the models’ accuracy using large-scale measurements and document the results according to standard protocols. Third, we have to still provide robust, easy-to-use software to the fire protection engineering community with a focus on run-time and computational efficiency. All three challenges are significant and will require coordination of many tasks to succeed.

How is it solved today, and by whom? An article in the Journal of Fire Protection Engineering (Olenick and Carpenter, Vol.13, May 2003) lists nearly 50 zone models and 20 computational fluid dynamic (CFD) models of fire. Most of these models were developed between 1980 and 2000, and few are actively maintained. Those that are currently maintained are either for special applications, are proprietary, or are used for research only.  Few of the models are publicly available. Almost none of these have been carefully validated.

Why NIST? CFAST and FDS are the two most widely-used validated fire models in the world, because no other single organization has the will or resources to develop and maintain them. Commercial software vendors consider fire protection engineering too small of a market to invest in research specifically aimed at fire. Universities cannot maintain the models indefinitely without a steady source of funding.  Professional societies, like the Society of Fire Protection Engineers (SFPE), typically do not have enough resources from its membership fees. Private fire protection engineering firms, who constitute the majority of the user community, do not have the resources to do it, and would not share the models with competitors even if they did. However, we have been successful in developing and maintaining the models because we have created a collaborative development framework that involves consulting firms like Hughes Associates, Schirmer Engineering and ArupFire; professional societies like the SFPE and NFPA Research Foundation; government labs like VTT Finland and SP Sweden; testing labs like Underwriters Laboratories and Southwest Research; universities like Worcester Polytechnic University (US), Edinburgh (UK), Victoria (Australia), Canterbury (New Zealand), and software developers like Thunderhead Engineering who have developed a commercially viable graphical user interface (GUI) for FDS, and Reaction Engineering, who are currently developing a GUI for both FDS and CFAST.

What is the new technical idea? There are three components of our modeling activities – algorithm development, verification and validation, and user support. We want to focus on the first, and streamline as much as we can the second and third.  The idea is to improve and expand the predictive capability of current fire models using sub-models that better describe critical physical and chemical processes in fires and can be validated using advanced fire measurement techniques. New data generated on solid-phase and gas-phase phenomena will guide the development of sub-models on material burning and soot emission.

The automation of the maintenance is new to fire modeling because the field is moving into maturity and few have considered what must be done long-term to maintain this technology. We are developing a system now that will allow interested stakeholders outside of NIST to help maintain the models permanently. Before that can happen, we must have a system, often referred to as a Configuration Management Plan, that allows dozens of individuals to access and modify the source code and documentation according to an established set of guidelines.

Why can we succeed now? Performance-based design in fire protection engineering is still relatively new, and as it continues to grow there will be increasing demand for validated numerical models. We have the right team to meet this growing demand. In EL, McGrattan and McDermott will focus on gas phase flow issues, Prasad will focus on the solid phase, Forney will continue to improve Smokeview focusing on adding ability to visualize large cases, Klein will handle IT issues, and Peacock will be in charge of CFAST. In addition, there are two extramural projects starting in FY 08 that directly support FDS development: one to Jason Floyd at Hughes to improve the combustion algorithm (soot production) and one to WPI/SwRI/SFPE to develop a standard guide for model input, especially solid phase/pyrolysis property data. Our partnership with VTT Finland is still strong, and they are focusing on continued development of the pyrolysis routines, evacuation, and mist suppression. New data generated through complementary projects in the Reduced Risk of Fire Spread in Buildings Program on solid-phase (material burning) and gas-phase phenomena (underventilated enclosure fires) will be used to guide and validate model development. Coordination of pyrolysis and material burning research in the Fire Research Division will enhance progress in our understanding of fire spread on real materials. 

What is the research plan? The development of FDS will proceed along two major fronts – the gas phase and the solid phase.1 For the gas phase, we plan to make FDS run in parallel on hundreds of individual processors to resolve, for example, fire spread in the wildland-urban interface over areas that are roughly 100 km2 or fire spread in buildings whose volumes are comparable to 10 floors of the World Trade Center (WTC), but with much finer resolution than that used previously for such a large-scale calculation (10 cm instead of 50 cm). These calculations will involve hundreds of millions of grid cells, and there is considerable work to be done to the basic hydrodynamic model to make this happen – streamlined transport algorithms, improved scalability on parallel computers, more stable turbulent combustion models, etc. 

The increased resolution in the gas phase will lead to more accurate prediction of the heat flux to solid surfaces. To exploit this, work will be done in conjunction with a three year extramural project to WPI/Southwest Research/SFPE whose objective is to develop standard methods of obtaining material properties for fire models. Much of our validation work has focused on the gas phase – we now intend to focus on validation work for flame spread. Up to now, part of the problem with flame spread validation has been the lack of material properties. As we begin to measure these properties, we will need to validate the current solid phase algorithms within FDS. 

Finally, the tremendous increase in the size of the calculations will require Smokeview to be overhauled so that it can handle gigabytes of data, rather than megabytes. This means shifting from a 32 bit to a 64 bit operating system to overcome the current limitation in the size of calculations that can be viewed in Smokeview. This suggests developing new techniques for efficiently visualizing large amounts of data. 


1 A comprehensive road-map on FDS development is presented on the FDS website (http://code.google.com/p/fds-smv/wiki/FDS_Road_Map) and addresses technical details for improved gas phase combustion, pyrolysis and the sold phase, droplets, particles and the dispersed second phase, active fire protection systems, radiation, the flow solver, and IT and user support issues.

Major Accomplishments:

Recent Results:

Output:

  • FDS Configuration Management Plan released in spring 2009. The document describes the way in which FDS and Smokeview are developed and maintained.
  • US NRC Fire Model User’s Guide released for public comment in summer 2009. This document demonstrates how FDS and CFAST are used in nuclear power plant applications.
  • Smokeview Technical Reference Guide released in summer 2009. This document describes the theory behind the various visualization techniques.
  • Smokeview Verification Guide released in summer 2009. This document describes methods used to verify the accuracy of Smokeview renderings.
  • Prasad, K. “Fire Spread and Growth on Polyurethane Foam Slabs,” Fire and Materials Conference, 2009.
  • Prasad, K., Pitts, W. and Yang, J. “A Numerical Study of Hydrogen or Helium Release and Mixing in Partially Confined Spaces,” NHA Annual Hydrogen Conference, 2009.

Outcomes:

  • 64 bit PC version of Smokeview released, enabling processing of much larger datasets than with previous 32 bit version.
  • Improved boundary conditions and turbulence models implemented in FDS 5.4. The results have been documented in the newly released FDS Verification Guide. 

Standards and Codes: The (NFPA) Fire Protection Research Foundation has recently highlighted the use of FDS in 6 major studies that it has sponsored with industry including, Smoke Detector Performance for Ceilings with Deep Beam Pockets, Siting Requirements for Hydrogen Supplies, Modeling of Fire Spread in Roadway Tunnels, Smoke Detection of Incipient Fires, Smoke Detector Spacing for Sloped Ceilings, and Smoke Detector Spacing for Corridors with Deep Beams. All of these studies were motivated by technical issues associated with various NFPA standards.

Start Date:

October 1, 2009

Lead Organizational Unit:

EL

Staff:

Principal Investigator:
Kevin McGrattan
 
Co-Investigators:
Glenn Forney
Randall McDermott
Richard Peacock
Kuldeep Prasad
 
 

Related Programs and Projects:

Reduced Risk of Fire Hazard in Buildings Program

Strategic Goal: Innovative Fire Protection

Filed Under: Anatomy of BuildingsFire Protection EngineeringScience & Technology

Tags:

RSSComments (0)

Trackback URL

Leave a Reply

You must be logged in to post a comment.